KTM 450 SMR User Manual

11 SERVICE WORK ON THE CHASSIS 36
Finishing work
– Mount the handlebar cushion.
– Remove the motorcycle from the lift stand. ( p. 30)
11.13 Greasing the steering head bearing x
800010-10
–
Remove the lower triple clamp. x ( p. 33)
–
Install the lower triple clamp. x ( p. 33)
11.14 Removing the start number plate
L01257-11
– Remove screw 1 and take off the clamp.
– Remove screw 2. Take off the start number plate.
11.15 Installing the start number plate
L01257-10
– Position the start number plate. Mount and tighten screw 1.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
The holding lugs engage.
– Position the brake line and clamp. Mount and tighten screw 2.
11.16 Removing the front fender
L00123-10
– Remove screws 1. Remove the front fender.
– Ensure that the spacers remain in position.

KTM 450 SMR Specifications

General

Brand	KTM
Model	450 SMR
Category	Motorcycle
Language	English