KTM 450 SMR User Manual

11 SERVICE WORK ON THE CHASSIS 52
L01287-10
– Inject the liquid into the system until it escapes from hole 6 of the master cylinder
without bubbles.
– To prevent overflow, drain fluid occasionally from the master cylinder reservoir.
– Remove the bleeding syringe. Mount and tighten screws bleeder screw.
– Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container rim 4 mm (0.16 in)
– Position the cover with the membrane. Mount and tighten the screws.

KTM 450 SMR Specifications

General

Displacement	449.9 cc
Bore x Stroke	95 mm x 63.4 mm
Starter	Electric starter
Transmission	5-speed
Cooling	Liquid cooled
Compression Ratio	12.75:1
Lubrication	Forced oil lubrication with 2 oil pumps
Final Drive	14:45
Ignition	Keihin EMS
Subframe	Aluminum
Suspension Travel Front	285 mm
ABS	No
Engine Type	Single cylinder, 4-stroke
Front Suspension	WP XACT-USD, Ø 48 mm
Rear Suspension	WP XACT monoshock
Front Brake	Single disc, 4-piston caliper
Rear Brake	Single disc, 1-piston caliper
Fuel System	Keihin EFI
Clutch	Wet multi-disc clutch, hydraulically operated
Handlebar	Aluminum, tapered Ø 28/22 mm
Wheels Front	17"
Wheels Rear	17"
Chain	5/8 x 1/4"
Wheelbase	1, 475 mm