KTM 450 SX-F 2016 User Manual

3 WORK 9
3.5 Installing the front fender
102162-10
Main work
–
Position the front fender. Mount and tighten screws

and

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Finishing work
– Install the start number plate. ( p. 9)
3.6 Installing the start number plate
102161-10
– Attach the start number plate to the brake line.
–
Position the start number plate. Mount and tighten screw

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
The holding lugs engage in the fender.
3.7 Removing the seat
102173-10
–
Remove screws

.
102174-01
– Raise the rear of the seat, push the seat back, and lift it off.

KTM 450 SX-F 2016 Specifications

General

Engine Type	Single cylinder, 4-stroke
Displacement	449.9 cc
Bore x Stroke	95 mm x 63.4 mm
Starter	Electric starter
Transmission	5-speed
Fuel System	Keihin EFI, 44 mm throttle body
Cooling	Liquid cooled
Seat Height	960 mm
Ground Clearance	370 mm
Compression Ratio	12.75:1
Ignition	Keihin EMS
Front Suspension	WP USD, Ø 48 mm
Rear Suspension	WP monoshock
Front Brake	Disc brake 260 mm
Rear Brake	Disc brake 220 mm
Final Drive	5/8 x 1/4"
Frame	Central double-cradle type 25CrMo4 steel