To Next Page

To Previous Page

3 WORK 10

3.8 Mounting the seat

102174-01

– Hook in the front of the seat at the collar bushing of the fuel tank, lower it at the

rear and simultaneously push it forward.

Seat is correctly latched.

102173-10

–

Mount and tighten the seat fixing screws



Guideline

Remaining screws, chassis M6 10 Nm (7.4 lbf ft)

3.9 Installing the battery

H00386-10

Main work

(All SX‑F models)

– Insert the battery into the battery compartment with the terminals facing for-

ward and secure with the holding bracket



Battery (C22S)

–

Mount and tighten screw



Guideline

Remaining nuts, chassis M6 10 Nm

(7.4 lbf ft)

–

Connect positive cable



and negative cable



with the battery.

Guideline

Screw, battery terminal M5 2.5 Nm

(1.84 lbf ft)

Contact disks



must be mounted under screws



and cable sockets



with the claws toward the battery terminal.

–

Slide positive terminal cover



over the positive terminal.

Questions and Answers:

Need help?

Do you have a question about the KTM 450 SX-F 2016 and is the answer not in the manual?

KTM 450 SX-F 2016 Specifications

General

Engine Type	Single cylinder, 4-stroke
Displacement	449.9 cc
Bore x Stroke	95 mm x 63.4 mm
Starter	Electric starter
Transmission	5-speed
Fuel System	Keihin EFI, 44 mm throttle body
Cooling	Liquid cooled
Seat Height	960 mm
Ground Clearance	370 mm
Compression Ratio	12.75:1
Ignition	Keihin EMS
Front Suspension	WP USD, Ø 48 mm
Rear Suspension	WP monoshock
Front Brake	Disc brake 260 mm
Rear Brake	Disc brake 220 mm
Final Drive	5/8 x 1/4"
Frame	Central double-cradle type 25CrMo4 steel