EasyManuals Logo
Home>KTM>Motorcycle>450 SX-F 2017

KTM 450 SX-F 2017 User Manual

KTM 450 SX-F 2017
125 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #114 background imageLoading...
Page #114 background image
22 SUBSTANCES 112
Brake fluid DOT 4 / DOT 5.1
Standard/classification
DOT
Guideline
Use only brake fluid that complies with the specified standard (see specifications on the container) and that exhibits the corre-
sponding properties.
Recommended supplier
Castrol
RESPONSE BRAKE FLUID SUPER DOT 4
Motorex
®
Brake Fluid DOT 5.1
Coolant
Guideline
Only use high-grade, silicate-free coolant with corrosion inhibitor additive for aluminum motors. Low grade and unsuitable
antifreeze causes corrosion, deposits and frothing.
Do not use pure water as only coolant is able to meet the requirements needed in terms of corrosion protection and lubrication
properties.
Only use coolant that complies with the requirements stated (see specifications on the container) and that has the relevant proper-
ties.
Antifreeze protection to at least 25 °C (13 °F)
The mixture ratio must be adjusted to the necessary antifreeze protection. Use distilled water if the coolant needs to be diluted.
The use of premixed coolant is recommended.
Observe the coolant manufacturer specifications for antifreeze protection, dilution and miscibility (compatibility) with other coolants.
Recommended supplier
Motorex
®
COOLANT M3.0
Engine oil (SAE 10W/50)
Standard/classification
JASO T903 MA ( p. 116)
SAE ( p. 116) (SAE 10W/50)
Guideline
Use only engine oils that comply with the specified standards (see specifications on the container) and that possess the corre-
sponding properties.
Synthetic engine oil
Recommended supplier
Motorex
®
Cross Power 4T
Fork oil (SAE 4) (48601166S1)
Standard/classification
SAE ( p. 116) (SAE 4)
Guideline
Use only oils that comply with the specified standards (see specifications on the container) and that exhibit the corresponding
properties.
Shock absorber fluid (SAE 2.5) (50180751S1)
Standard/classification
SAE ( p. 116) (SAE 2.5)
Guideline
Use only oils that comply with the specified standards (see specifications on the container) and that exhibit the corresponding
properties.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 450 SX-F 2017 and is the answer not in the manual?

KTM 450 SX-F 2017 Specifications

General IconGeneral
BrandKTM
Model450 SX-F 2017
CategoryMotorcycle
LanguageEnglish

Related product manuals