KTM 450 SX-F 2017 User Manual

11 SERVICE WORK ON THE CHASSIS 50
11.20 Removing the seat
S01230-10
–
Remove screws
1
.
S01231-01
– Raise the rear of the seat, pull the seat back, and lift it off.
11.21 Mounting the seat
S01231-11
– Mount the front of the seat on the collar bushing of the fuel tank, lower the seat at
the rear, and push the seat forward.
S01230-10
–
Mount and tighten screws
1
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
11.22 Removing the air filter box cover
V00310-10
(All SX‑F standard models, SX‑F Factory Edition)
Condition
The air filter box cover is secured.
–
Remove screw
1
.

KTM 450 SX-F 2017 Specifications

General

Displacement	449.9 cc
Bore x Stroke	95 mm x 63.4 mm
Starter	Electric starter
Transmission	5-speed
Ground Clearance	370 mm
Seat Height	960 mm
Compression Ratio	12.75:1
Fuel System	Keihin EFI, throttle body 44 mm
Ignition	Keihin EMS
Engine Type	Single cylinder, 4-stroke
Frame	Central double-cradle type 25CrMo4 steel
Front Brake	Disc brake, Ø 260 mm
Rear Brake	Disc brake, Ø 220 mm
Fuel Capacity	7 liters
Wheelbase	1, 485 mm
Front Suspension	WP USD, Ø 48 mm