6 CONTROLS 15
6.13 Idle speed adjusting screw
C00489-10
The idle setting of the throttle valve body has a big influence on the vehicle's starting
behavior, on stable idling, and on vehicle response when the throttle is opened. This
means that an engine with a correctly set idle speed is easier to start than if the idle is
set wrongly.
The idle speed is adjusted with idle speed adjusting screw
1
.
Increase the idle speed by turning the idle speed adjusting screw clockwise.
Decrease the idle speed by turning the idle speed adjusting screw counterclockwise.
6.14 Shift lever
401950-10
Shift lever
1
is mounted on the left side of the engine.
401950-13
(All USA models)
The gear positions can be seen in the photograph.
The neutral or idle position is between the first and second gears.
401950-14
(SX‑F EU)
The gear positions can be seen in the photograph.
The neutral or idle position is between the first and second gears.
To Next Page
Loading...
Need help?
General
