KTM 450 XC-F User Manual

11 SERVICE WORK ON THE CHASSIS 46
L01277-10
– Remove the cable binder of the frame protector.
–
Remove screw
5
.
– Remove the frame protector.
Info
Pay attention to the holding lugs.
L01279-10
–
Remove screw
6
.
– Carefully remove the shock absorber upward out of the vehicle.
11.23 Installing the shock absorber x
L01280-10
Main work
– From above, position the shock absorber carefully in the vehicle.
–
Mount and tighten screw
1
.
Guideline
Screw, top shock absorber M10 60 Nm
(44.3 lbf ft)
Loctite
®
2701™
L01277-11
– Position the frame protector.
Info
Pay attention to the holding lugs.
–
Mount and tighten screw
2
.
Guideline
Screw, frame protector M5 3 Nm (2.2 lbf ft)
– Attach the frame protector with a cable binder.
S00126-11
– Lower the swingarm.
L01294-11
– Position the angle lever and linkage lever.
–
Mount and tighten screw cap
3
.
Guideline
Nut, linkage lever to angle lever M14x1.5 80 Nm (59 lbf ft)
–
Mount and tighten screw
4
.
Guideline
Screw, bottom shock
absorber
M10 60 Nm
(44.3 lbf ft)
Loctite
®
2701™

KTM 450 XC-F Specifications

General

Brand	KTM
Model	450 XC-F
Category	Motorcycle
Language	English