11 MAINTENANCE WORK ON THE CHASSIS 28
11.4 Removing the fork protector x
700431-01
– Remove screws 1. Take off clamp 2.
– Remove screws 3 on the left fork leg. Take off the fork protector.
700432-01
– Remove screws 4 on the right fork leg. Take off the fork protector.
11.5 Installing the fork protector x
700432-10
– Position the fork protection on the right fork leg. Mount and tighten screws 1.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
700433-01
– Position the fork protection on the left fork leg. Mount and tighten screws 2.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
– Position the brake line. Mount clamp 3.
– Mount the screws 4.
11.6 Removing the fork legs x
Preparatory work
– Raise the motorcycle with a lift stand. ( p. 27)
–
Remove the front wheel. x ( p. 55)
601593-10
Main work
– Remove screws 1 and take off the clamp.
– Remove screws 2 and take off the brake caliper.
– Hang the brake caliper and the brake line loosely to the side.
To Next Page
Loading...
Need help?
General
