KTM 50 SX 2012 User Manual

16 SERVICE WORK ON THE ENGINE 71
S00005-10
– Remove gear oil level check screw 1.
S00007-11
– Remove screw cap 2. Stand the vehicle upright.
– Add gear oil until it flows out of the bore of the gear oil level screw.
Gear oil (ATF Dexron 3) ( p. 81)
– Mount and tighten the gear oil level check screw.
Guideline
Screw, gear oil level check M6 6 Nm (4.4 lbf ft)
– Mount and tighten screw cap 2.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result
in unconsciousness and/or death.
– When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
– Start the engine and check that it is oil-tight.

KTM 50 SX 2012 Specifications

General

Brand	KTM
Model	50 SX 2012
Category	Motorcycle
Language	English