ELECTRICAL SYSTEM 15
125
This battery charger tests whether the 12-V battery
retains its voltage. It is also impossible to overcharge
the 12-V battery with this battery charger. The charging
time may be longer at low temperatures.
This battery charger is only suitable for lithium iron
phosphate batteries. Read the accompanying KTM Pow-
erParts instructions.
Info
Never remove cover
1
.
– Switch off the battery charger after charging and disconnect it
from the 12-V battery.
Finishing work
– Install the 12-V battery. ( p. 122)
– Mount the seat. ( p. 79)
15.4 Changing the main fuse
Warning
Fire hazard Incorrect fuses overload the electrical system.
– Only use fuses with the required ampere value.
– Do not bypass or repair fuses.
Info
The main fuse protects all power consumers of the vehicle.
Preparatory work
– Press and hold the switch-off button while the engine is
idling until the engine stops.
– Remove the seat. ( p. 78)
V01776-11
Main work
–
Pull starter relay
1
from the holder.
To Next Page
Loading...
Need help?
General
