KTM 690 SMC 2008 User Manual

WORK 11
3.13Setting the clock
Condition
The motorcycle is standing.
700115-10
– Switch on the ignition by turning the ignition key in the position 
(690SMCUSA).
– Press theMODEbutton several times until theODO display mode is active.
– Keep theMODEbutton and theSETbutton pressed simultaneously.
The time begins to flash.
– Press theMODEbutton to adjust the hour.
– Press theSETbutton to adjust the minute.
– Keep theMODEbutton and theSETbutton pressed simultaneously.
The time is set.
3.14Setting kilometers or miles
Info
If you change the unit, the ODO value is retained and converted accordingly.
Making the setting according to the country.
Condition
The motorcycle is standing.
700120-01
– Switch on the ignition by turning the ignition key in the position 
(690SMCUSA).
– Press theMODEbutton several times until theODO display mode is active.
– Keep the MODEbutton pressed until the display mode changes fromKm/h to Mph or
from Mph to Km/h.
Guideline
Activation duration of MODEbutton 10s

KTM 690 SMC 2008 Specifications

General

Engine Type	Single cylinder, 4-stroke
Displacement	654 cc
Bore x Stroke	102 mm x 80 mm
Compression Ratio	11.8:1
Cooling System	Liquid cooled
Transmission	6-speed
Front Brakes	Single 320 mm disc, 4-piston caliper
Rear Brakes	Single 240 mm disc, 1-piston caliper
Front Tire	120/70 ZR17
Rear Tire	160/60 ZR17
Dry Weight	139 kg
Fuel Capacity	12 liters
Seat Height	890 mm
Starter	Electric
Lubrication	Pressure lubrication with 2 Eaton pumps
ABS	Not available
Front Wheel	3.50 x 17"
Rear Wheel	5.00 x 17"
Power	46 kW (63 hp) at 7500 rpm
Fuel System	Keihin EFI
Front Suspension	WP USD Ø 48 mm
Rear Suspension	WP shock absorber
Clutch	hydraulically operated
Frame	Chromium-Molybdenum trellis frame, powder-coated
Torque	65 Nm @ 6, 500 rpm