16 TUNING THE ENGINE
112
16.4 Changing the mapping
Info
The desired engine characteristic can be activated using the combination switch.
The setting most recently selected is activated again when restarting.
Traction control can also be activated in each mapping.
The mapping can also be changed during the ride.
F03762-10
Activating STANDARD mapping:
–
Press button
1
.
Guideline
Engine speed < 4,000 rpm
The indicator lamp
A
lights up.
STANDARD – balanced response
Info
Traction control can be activated additionally using
the TC button
3
.
F03763-10
Activating ADVANCED mapping:
–
Press button
2
.
Guideline
Engine speed < 4,000 rpm
The indicator lamp
B
lights up.
ADVANCED – direct response
Info
Traction control can be activated additionally using
the TC button
3
.
16.5 Adjusting the idle speed
Warning
Danger of accidents The engine may go out spontaneously if the idle speed is set too low.
– Set the idle speed to the specified value. (Your authorized KTM workshop will be glad to help.)
To Next Page
Loading...
Need help?
General
