Kubota BX1800 User Manual

■ Replacing Fuse
A CAUTION
To avoid personal injury:
• Be sure to stop the engine and remove the key
before replacing fuse.
The tractor electrical system is protected from potential
damage by fuses.
A blown fuse indicates that there is an overload or short
somewhere in the electrical system.
If any of the fuses should blow, replace with a new one of
the same capacity.
IMPORTANT:
• Before replacing a blown fuse, determine why the fuse
blew and make any necessary repairs. Failure to
follow this procedure may result in serious damage to
the tractor electrical ·system. Refer to the
troubleshooting section of this manual or your local
KUBOTA Dealer for specific information dealing with
electrical problems.
If any of them should blow, replace with a new one of
the same capacity.
F-11496E
1
2
-
-
3
-
-
4
-
-
-:::______:::::
!20AI
WORKING LIGHT
l15AI
ACCESSORIES
!15AI
HAZARD LAMP
l15AI
SOLENOID
!20AI
!15A!
(Spare)
(Spare)
I .
~l:flf~.L_:~-----------------
t >~t
. ""'.:,,._
I c@,"'
ft .
PERIODIC SERVICE 55
♦ Protected circuit
FUSE
CAPACITY
Protected circuit
No.
(A)
G)
20
Working light
®
15
Head light
®
15
Hazard light
©
15
Key stop
®
Slow blow
Check circuit against
Fuse(30A)
wrong battery connection
■ Replacing Light Bulb
1. Head lights :
Take the bulb out of the light body and replace with a
new one.
2. Other lights :
Detach the lens and replace the bulb.
Light
Capacity
Headlights
24W
Tail light
3W
Hazard light
20W
Additional turn signal lamp 20W

Kubota BX1800 Specifications

General

Brand	Kubota
Model	BX1800
Category	Tractor
Language	English