EasyManuals Logo
Home>Kubota>Portable Generator>J106-STD

Kubota J106-STD User Manual

Kubota J106-STD
85 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
PERIODIC SERVICE32
ENGLISH
ENGINE OIL
To avoid personal injury:
A Be sure to stop the engine before
checking and changing the engine
oil and the oil filter cartridge.
A DO NOT touch muffler or exhaust
pipes while they are hot; severe
burns could result. Always stop the
engine and allow it to cool before
conducting inspections,
maintenance, or cleaning.
A Contact with engine oil can damage
your skin.
Put on gloves when handling engine
oil. If you come in contact with
engine oil, wash it off immediately.
A Be sure to check the engine oil on a level surface. If
placed on gradients, oil quantity can not be measured
accurately.
A Do not operate a diesel engine when engine oil is
overfilled. This can effect the air intake system which
could result in engine damage or malfunction.
BChecking Oil Level and Adding Engine Oil
1. Check the engine oil level before starting or more than
5 minutes after stopping the engine.
2. Remove the oil level gauge, wipe it clean and reinstall
it.
3. Take the oil level gauge out again, and check the oil
level.
[Engine model : Z482, D722]
[Engine model : D1005, V1305]
(1) Oil port
(2) Oil level gauge
[Lower end of oil level gauge]
(A) Engine oil level within this
range is proper.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kubota J106-STD and is the answer not in the manual?

Kubota J106-STD Specifications

General IconGeneral
BrandKubota
ModelJ106-STD
CategoryPortable Generator
LanguageEnglish

Related product manuals