OPERATING THE TRACTOR54
PARKING
BParking
To avoid personal injury:
BEFORE DISMOUNTING TRACTOR
A ALWAYS SET PARKING BRAKE AND LOWER
ALL IMPLEMENTS TO THE GROUND.
Leaving transmission in gear with the engine
stopped will not prevent tractor with GST and
HST transmission from rolling.
A STOP THE ENGINE AND REMOVE THE KEY.
1. When parking, be sure to set the parking brake.
To set the parking brake;
(1) Interlock the brake pedals.
(2) Depress the brake pedals.
(3) Latch the brake pedals with the parking brake
lever.
[GST / Manual Transmission Type]
[HST Type]
A To prevent damage to the parking brake lever, make
sure that brake pedals are fully depressed before
pulling the parking brake lever up.
2. Before getting off the tractor, disengage the PTO,
lower all implements to the ground, place all control
levers in their neutral positions, set the parking brake,
stop the engine and remove the key.
3. If it is necessary to park on an incline, be sure to chock
the wheels to prevent accidental rolling of the
machine.
(1) Parking brake lever (A) Interlock the brake pedals
(B) "DEPRESS"
(C) "PULL"
To Next Page
Loading...
Need help?
General
