51CAB OPERATION
ENGLISH
WIPER
BFront Wiper / Washer Switch
[if equipped]
Turn on the key switch and press the bottom half of the
wiper switch to the first step, and the wiper is activated.
When the switch is pressed further to the second step,
washer liquid jets out.
The jetting continues while the switch is pressed and the
wiper is activated continuously.
[with CAB HEATER]
[without CAB HEATER]
A Do not activate the wipers when the windows are dry,
they may be scratched.
Be sure to jet washer liquid first and then activate the
wipers.
BUsing the Wipers in Cold Season
1. While not used in cold season, keep the wiper blades
off the front window to prevent them from being stuck
with ice.
2. If the front window is covered with snow, scrape it off
the front window before using the wipers.
3. If the wiper blades are stuck on the front window with
ice and fail to move, be sure to turn the main key
switch to "OFF" and remove the ice off the blades.
Then place the main key switch back to "ON".
4. When commercially available cold-season wiper
blades are used, make sure their size is the same as
or smaller than that of the standard ones.
A In cold season, the wiper blades and the wiper motor
might get overloaded causing damage. To avoid this,
be sure to take the above precautions.
(1) Front wiper / washer switch (A) "Wiper is activated"
(B) "Washer liquid jets out"
(1) Front wiper / washer switch (A) "Wiper is activated"
(B) "Washer liquid jets out"
To Next Page
Loading...
Need help?
General
