KYMCO Dink-R150 User Manual

SECTION 2 - CONTROLS&FEATURES
IGNITION SWITCH(Dink-R125)
To operate the ignition switch and its functions:
All electrical circuits are off. The engine can't run
or be started .
“ ” Position:
The ignition circuit is "ON" and engine can now be
started. The key can not be removed from the
ignition switch in this position.
“ ” Position:
“ ” Position:
To lock the steering, turn the handlebar all the way
to the left, push down and turn the key to the " "
position and remove the key. All electrical circuits
are off.
“ ” Position:
With the ignition key in the " " position (the
engine is running), push the key in and turn it
counterclockwise from " " to the " "
position.
With the ignition key in the " " position
(the engine is not running), turn the
counterclockwise from the " " to the
" " position.
With the ignition key in the " "position,
turn the key counterclockwise from " "
to " "position.Pull up on the back
portion of the seat to lift it up.
16

KYMCO Dink-R150 Specifications

General

Brand	KYMCO
Model	Dink-R150
Category	Motorcycle
Language	English