MAINTENANCE
Maintenance schedule
Maintenance schedule chart:
I: INSPECT AND CLEAN, ADJUST, LUBRICATE OR REPLACE IF NECESSARY
C: CLEAN R: REPLACE A: ADJUST L: LUBRICATE D: DIAGNOSE T: TIGHTENING
The maintenance schedule on the following two pages specifies the maintenance required
to keep the scooter in good running condition. Maintenance should be performed according
to the design standards and specifications by the authorized KYMCO dealer.
Perform the pre-ride inspection at each scheduled maintenance period. This interval should
be judged by odometer reading or by months, whichever comes first.
Be serviced by the KYMCO dealer, unless you have the proper tools, service data and are
technically qualified.
For safety reason, we recommend these items be serviced only by the KYMCO dealer. KYMCO
recommends that the KYMCO dealer should take a road test after each maintenance service.
*
**
45
NOTES:
1. For higher odometer readings, repeat by the service interval illustrated here.
2. Service more frequently for long-term riding in unusually wet or dusty areas.
3. Service more frequently for long-term riding in rain or with full throttle.
4. Inspect every 5000 km (3000 mi) after replacement and replace every 10000 km (6000 mi).
5. Replace every 5000km (3000mi) or every 6 months. Replacement requires mechanical skill.
6. Replace every 2 years. Replacement requires mechanical skill.
7. Replace every 2000km(1200mi), Inspect every 1000km(600mi) ,Add engine oil if required.
8.Radiator and radiator protecting grid: Inspect and clean every 1000km,if riding in dusty /moisture area,
inspect and clean more frequently(Dink-R 150).
To Next Page
Loading...
Need help?
General
