MAINTENANCE
1.Inspect the thickness of brake pad to verify
if there is enough lining to brake properly.
2.If the wear indicated groove at the brake
pad is no longer visible, this means that the
brake pad is worn and requires replacement.
3.Before riding, apply braking several times to
reach the proper lever stroke and firm feel on
braking action that will ensure the brake pads
are pressed against the brake disks securely.
Brake Pad Inspection
WARNING
1.The brakes will wear quickly if the lever is
continually applied during riding.
2.The worn brake pad will increase the stop
distance and may cause an accident easily.
Brake lever adjusters
There is an adjuster on each brake lever. Each
adjuster has 4 positions so that the released
lever position can be adjusted to suit the
personal grabbing requirement.
The nearest distance from the grip to the
released lever is set at number 1 and the farthest
is set at
number 4.
CAUTION
The nearest distance from the grip to the
released lever is set at number 1 and the
farthest is set at number 4.
Knob
Mark
54
To Next Page
Loading...
Need help?
General
