KYMCO Dink-R150 User Manual

3
4
5
6
MAINTENANCE
Transmission Gear Oil change
1. Stand the scooter by the main stand.
2. Remove the gear oil drain bolt .
3. Remove the gear oil filler bolt , and then slowly
rotate the rear wheel to drain the gear oil off.
4. Fill with the recommended oil to reach the capacity
listed below.
5. Install the transmission filler bolt and tighten it to
the specified torque.
Gear oil type: SAE 90
Full capacity: 0.13 L
Exchange capacity: 0.12L
1
2
1
2
CAUTION
Use the genuine engine oil or another with
the same quality and grade to avoid burnout
on the bearing or damage on the gear set.
CAUTION
Must follow the local regulation and obey
the related prohibition about the disposal
of oil.
2
1
51

KYMCO Dink-R150 Specifications

General

Brand	KYMCO
Model	Dink-R150
Category	Motorcycle
Language	English