9
2
SECTION 2 -
CONTROLS&FEATURES
To operate the ignition switch and it s functions:'
IGNITION SWITCH
All electrical circuits are off. The engine will not
start or run.
“ ” Position:
The ignition circuit is "ON" and engine can now be
started. The key can not be removed from the
ignition switch in this position.
“ ” Position:
“ ” Position:
To lock the steering, turn the handlebar all the way
to the left, push down and turn the key to the " "
position and remove the key. All electrical circuits
are off.
“ ” Position:
With the ignition key at the " " position (the
engine is running), push the key in and turn it
counterclockwise from " " to the position.
""
With the ignition key in the " " position (the
engine is not running), turn the counterclockwise
from the " " to the position.
Pull up on the back portion of the seat to lift it up.
""
To open the fuel filler cap, turn the key to the " "
position. Make sure that the key is at the " "
position when starting the engine.
“ ” Position:
To Next Page
Loading...
Need help?
General
