Name: KYMCO MYROAD 700i
Brand: KYMCO
Rating: 4 (1 reviews)

To Next Page

To Previous Page

MAINTENANCE

Engine oil quality is the primary factor that affects

engine longevity. Change your scooter's engine oil

as specified in the maintenance schedule .

After a few minutes. The oil level should be

between the upper(H) and lower(L) marks on

the oil inspection screen.

If required, remove the oil filler cap and add the

specified oil so the oil level touches the upper

level mark on the screen. Do not overfill.

Reinstall the oil filler cap . Check for oil leaks.

WARNING

The engine and related components can

become very hot. Use care when inspecting the

oil level so you would not burn yourself. If

needed, let the engine and exhaust system cool

before working in those areas.

NOTE: Change the engine oil with the engine at

normal operating temperature and the scooter on

its center stand to assure complete and rapid

draining.

Remove the oil filler cap from the right

crankcase cover.

Place a suitable container (drain pan) under the

left crankcase.

Engine oil replacement

Other manuals for KYMCO MYROAD 700i

Questions and Answers:

Need help?

Do you have a question about the KYMCO MYROAD 700i and is the answer not in the manual?

General