KYMCO MYROAD 700i User Manual

40
MAINTENANCE
4
Engine oil
Use a premium quality 4-stroke engine oil to
ensure longer service life of your scooter. Only use
oils that have a SJ rating above per the API service
classification.
Engine oil viscosity : SAE 5W- 05
If these viscosities are not available, select an
alternative engine oil according to the chart shown
below.
Engine oil capacity: L3.0
Engine oil level inspection
Start the engine and let it idle for a few minutes.
1.
2. Stop the engine and put the scooter on its center
stand on level ground.
CAUTION
Running the engine with insufficient oil pressure
can cause serious engine damage.
Check the engine oil level each day before riding
your scooter. The level must be maintained
between the upper and lower level marks on
the oil inspection screen .
-10 0 1020 3040C
0
020406080100F
0
20W-40 , 20W-50
15W-40 , 15W-50
10W-40
10W-30
20W-40, 20W-50
15W-40, 15W-50
10W-40
10W-30
20W-40 , 20W-50
5W-50
ENGINE OIL VISCOSITIES
Engine oil recommendation
H
L

KYMCO MYROAD 700i Specifications

General

Displacement	699.5 cc
Fuel System	Electronic Fuel Injection
Cooling System	Liquid-cooled
Transmission	CVT
Front Suspension	Telescopic fork
Rear Brake	Single disc
Seat Height	800 mm
Fuel Capacity	15 liters
Front Tire	120/70-15
Rear Tire	160/60-14
ABS	Yes
Engine Type	4-stroke, DOHC, 8-valve
Front Brake	Dual Discs
Wheelbase	1, 590 mm