8
To operate the ignition switch and it’s functions:
"
"Position:
All electrical circuits are off. The engine will not start or run.
The key can be removed from the ignition switch.
"
" Position:
The ignition circuit is "ON" and engine can now be started. The
key cannot be removed from the ignition switch in this position.
"
" Position:
To open the seat, turn the key to the " " position.
Keys
Your Sento scooter is supplied with two identical ignition switch
keys 1. The ignition key operates the ignition switch, the steer-
ing lock, and the fuel filler cap, and is used to open the seat to
gain access to the center compartment.
The keys have a unique code that is stamped on the tab sup-
plied with the keys. This code is not stamped on the scooter
and is not recorded in the vehicle's basic documentation for
security reasons. Since this code is required if you need re-
placement keys, record this important code in the box provided
on the inside, rear cover of this Owner's Manual.
11
11
1
Ignition switch
CONTROLS & FEATURES
To Next Page
Loading...
Need help?
General