26
OPERATION
Starting the engine (electric start)
To start your scooter using the electric starting motor, follow
this procedure:
1. Unlock the steering with the
igntion switch key
2. Turn the igntion switch to “ “.
NOTE: Before starting, check
the engine oil and fuel levels.
Take the scooter off of the
main stand.
3. Apply the rear brake (left lever) .
The brake must be adjusted and functioning properly
to lock the rear wheel during starting or the scooter
could accelerate away when the engine starts.
To prevent damage to the starter motor, do not operate
the starter motor for more than five seconds at a time. If
the scooter fails to start immediately, check the fuel level
and the battery condition, and allow the starter motor to
cool before attempting to start the engine again.
4. Press the starter button without rotating the throttle grip.
NOTE: If the scooter’s engine is warm and does not start
immediately, rotate the throttle grip to 1/8 to 1/4 open to
help the engine start.
To Next Page
Loading...
Need help?
General
