CLEANING
Clean your scooter regularly to protect the surface finishes and inspect for damage, wear,
and oil, coolant or brake fluid leakage.
Avoid cleaning products that are not specifically designed for scooter or automobile
surfaces. They may contain harsh detergents or chemical solvents that could damage the
metal, paint, and plastic on your scooter.
If your scooter is still warm form recent operation, give the engine and exhaust system time
to cool off.
We recommend avoiding the use of high pressure water spray (typical in coin-operated car
washes).
High pressure water (or air) can damage certain parts of the scooter.
1. Rinse the scooter thoroughly with cool water to remove loose dirt.
2. Clean the scooter with a sponge or soft cloth using cool water. Avoid directing water to
muffler outlets and electrical parts.
NOTE:
Washing the scooter
101
To Next Page
Loading...
Need help?
General
