SIDE STAND
Perform the following maintenance in accordance with
the maintenance schedule.
Functional check:
Check the spring for damage or loss of tension and the
side stand assembly for freedom of movement.
Check the side stand ignition cut-off system:
1. Place the scooter on its center stand.
2. Put the side stand up and start the engine.
3. Lower the side stand. The engine should stop as you
put the side stand down.
If the side stand system does not operate as described,
see your KYMCO dealer for service.
!
!
Side stand up
Side stand down
88
To Next Page
Loading...
Need help?
General
