Grayscale Range of gray tones varying from black at the darkest to white at the
lightest.
Gutter Blank space on the left side or top of a printed page that can be increased
by scaling down text and graphics. When used with Duplex printing, the enlarged
blank space lines up evenly on both sides of the sheet. The larger blank space is
created by shifting the printable area to the right or down as much as one inch (25.4
mm).
H
Half speed mode This feature lets you reduce print speed to improve printing on
small size, thick, or textured paper. Selecting this mode may result in quieter printing.
Halftone screen Imaging process that breaks down an image into dots. An
experienced user can adjust Halftone screen settings to create shades of gray in
graphic images. Larger dots spaced close together create darker shades, and smaller
dots spaced farther apart create lighter shades. Shading can be varied by adjusting
the number of rows of dots, the angle at which rows of dots are placed, and the shape
of the dots.
I
Ignore Application Collation Check box in Device Settings > Compatibility that
determines the priority of Collate settings. If the check box is selected, the printer
driver setting is used. If the check box is cleared, the software application setting is
used.
J
Job accounting An accounting system that records and controls the number of
pages printed by each account ID. Account IDs can be assigned at the printing system
and stored in the driver. After account IDs are assigned, you can use the Job
accounting option to print in the Job accounting mode.
Job name A Job name is a unique identifier for each print job, to help you find and
print the job from the printing system’s operation panel. When you send a print job
using one of the Job storage (e-MPS) options, you can assign a custom name to the
job or use the name of the application file.
L
Line Thinning This feature reduces the pen width of lines used for barcodes and
drawings. Drawing values controlled by an application are not changed. Line thinning
is available when PCL XL is selected in the PDL Settings dialog box.
Lock Settings Locking feature for some settings that an administrator can specify
at the tab or feature level in the driver. The settings are then applied to print jobs from
the driver, and changes are restricted. Locking a setting will also lock that setting
where it appears in other tabs. The administrator can also set a password that is
required to temporarily unlock a feature.
M
Media source enumeration A Device Settings option that maintains
compatibility for cassettes and feeders between old drivers and new drivers or when
moving from one manufacturer to another. Compatibility creates a smooth transition
for environments using macros or PRESCRIBE commands to access cassettes and
feeders.
MP tray Source tray used for labels, transparencies, envelopes, and custom
printing media.
Printer Driver
ii
To Next Page
Loading...
Need help?
General