EasyManuals Logo
Home>Kyocera>All in One Printer>ECOSYS P2135dn

Kyocera ECOSYS P2135dn User Manual

Kyocera ECOSYS P2135dn
221 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
4-28 Connecting and Printing
Energy Saver Function
Low Power Mode
When the set time (factory setting is 1 minute) elapses after the printer is
last used, the printer automatically enters low power mode. The
message display backlight and lights turn off and power consumption is
reduced. This status is referred to as Low Power Mode.
The amount of time of no activity that must pass before Low Power
Mode is activated may be lengthened. For more information refer to Low
Power Timer (Low Power Mode timer timeout time) section of the
Advanced Operation Guide.
If print data is received during Low Power Mode, the message display
lights up and printing starts.
To resume, press [GO]. The printer will be ready to operate within
8 seconds or less.
Note that ambient environmental conditions, such as ventilation, may
cause the machine to respond more slowly.
Sleep
For Europe
When the set time (factory setting is 15 minutes) elapses after the printer
is last used, the printer automatically enters sleep mode. The message
display backlight and lights turn off to minimize power consumption. This
status is referred to as Sleep.
To use the printer, press [GO]. The printer will be ready to operate within
16.5 seconds or less.
For more information about configuring settings, refer to Sleep Timer
(Sleep timer timeout setting) section of the Advanced Operation Guide.
Except for Europe
When the set time (factory setting is 1 minute) elapses after the printer is
last used, the printer automatically enters sleep mode. The message
display backlight and lights turn off to minimize power consumption. This
status is referred to as Sleep.
For more information about configuring settings, refer to Sleep Timer
(Sleep timer timeout setting) section of the Advanced Operation Guide.
There are two sleep modes: Quick Recovery and Energy Saver. The
default setting is Energy Saver mode.
Quick Recovery Mode
The recovery from the sleep mode is faster than when using Energy
Saver mode.
The message display goes off when sleep mode is entered and the
Ready indicator flashes.
The machine recovers quickly when [GO] is pressed. The machine also
automatically recovers and prints when a job is detected.
If print data is received during Sleep, the print job is performed while the
message display remains unlit.
To use the printer, press [GO].

Table of Contents

Other manuals for Kyocera ECOSYS P2135dn

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera ECOSYS P2135dn and is the answer not in the manual?

Kyocera ECOSYS P2135dn Specifications

General IconGeneral
ColorNo
Duplex printingYes
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Duplex printing modeAuto
Time to first page (black, normal)8 s
Print speed (black, normal quality, A4/US Letter)35 ppm
Printing colorsBlack
Maximum duty cycle2800 pages per month
Number of print cartridges1
Page description languagesEpson LQ, IBM ProPrinter, Microsoft XPS, PCL 5c, PCL 6, PCL XL, PDF 1.7, PostScript 3
Paper input typeCassette, Paper tray
Total input capacity300 sheets
Total output capacity- sheets
Maximum input capacity800 sheets
Total number of input trays2
Maximum number of input trays4
Multi-Purpose tray input capacity50 sheets
Custom media width70 - 216 mm
Maximum print size216 x 356 mm
Custom media length148 - 356 mm
Duplex media weight60 - 105 g/m²
Paper tray media typesPlain paper
Paper tray media weight60 - 120 g/m²
Non-ISO print media sizesFolio (media size), Letter (media size)
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 220 g/m²
Mobile printing technologies-
Standard interfacesEthernet, USB 2.0
Optional connectivityWireless LAN
Processor familyPowerPC
Maximum internal memory1280 MB
Sound power level (standby)34.2 dB
Sound pressure level (printing)53.5 dB
Sound pressure level (quiet mode)50.2 dB
DisplayLCD
CertificationTÜV/GS, CE
Product colorBlack, White
Display number of lines2 lines
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)11 W
Power consumption (printing)499 W
Power consumption (PowerSave)2.5 W
Mac operating systems supportedMac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Sustainability certificatesBlue Angel, ENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth393 mm
Width375 mm
Height267 mm

Related product manuals