Option 8-3
Expansion Memory Modules
To expand the printer memory for more complex print jobs and faster
print speed, you can plug in optional memory module (dual in line
memory module) in the memory slot provided on the printer main
controller board. You can select additional memory module from 128,
256, 512, or 1024 MB. The maximum memory size is 1152 MB.
Precautions for Handling the Printer's Main
Controller Board and Memory Module
To protect electronic parts, discharge static electricity from your body by
touching a water pipe (faucet) or other large metal object before handling
the memory module. Or, wear an antistatic wrist strap, if possible, when
you install the memory module.
Always hold the main controller board or a memory module by its edges
as shown below to avoid damaging electronic parts.
Installing the Memory Module
1
Turn off the printer and disconnect the power cord and printer cable.
2 Remove the right cover with a piece of metal similar to coin.
Note The expansion memory should only be installed by your
service technician. We shall not be liable for any damages caused
by improper installation of expansion memory.
Correct
Incorrect
To Next Page
Loading...
Need help?
General
Weight and Dimensions
