Kyocera KM-NET User Manual

IC Link for Windows
IC Link Image Converter
Converting *.BMP or *.JPEG Image for PRESCRIBE Macro (continued)
3. After the Bitmap Converted macro file has been added to the IC Link Project File, you can build it to the
Printer by selecting [Project>Build]. This will launch the Project Build dialogue box and you can
Configure the IC Memory Card Settings and Select the target printer to build the IC Link Project File.
Additional details on Project Builds can be referenced on page 6 of this User Guide.
{PAGE }

Kyocera KM-NET Specifications

General

Brand	Kyocera
Model	KM-NET
Category	Printer
Language	English