Labconco Protector Echo 180 Series User Manual

Product Service 1-800-522-7658
6
Original instructions
CHAPTER 2
PREREQUISITES
Before you install your filtered fume hood, you need to prepare your site for
installation. Carefully examine the location where you intend to install your
hood. You must be certain that the area is level and of solid construction. In
addition, a dedicated source of electrical power must be located near the
installation site.
Carefully read this chapter to learn the requirements for your installation site:
 The location requirements.
 The support requirements.
 The Filtration Technology airflow and power requirements.
 The electrical power requirements.
 The service line requirements.
 The space requirements.
 The commissioning and setup requirements.
Refer to Appendix B: Protector Filtered Hood Dimensions for complete fume
hood dimensions.
Refer to Appendix C: Protector Filtered Hood Specifications for complete filtered
fume hood electrical and environmental conditions, specifications and
requirements.

Labconco Protector Echo 180 Series Specifications

General

Brand	Labconco
Model	Protector Echo 180 Series
Category	Laboratory Equipment
Language	English