Labconco Protector Echo 180 Series User Manual

Product Service 1-800-522-7658
151
Original instructions
APPENDIX G
SECURE MODE
Secure mode can be used so that the hood operator with the “User card” cannot silence
any alarms (the sash too high) or turn the hood on/off. They can only turn the lights on/off
as it is needed during their hood operation.
Activate Secure Mode
1. Put an “Administrator” card in the card reader.
2. Arrow down to “Administration Menu” and press “OK” to select it.
3. Now arrow down to “Ventilation” and press “OK” to select it.
4. Next arrow down to “Secure Mode” and press “OK” to select it.
5. Now press “OK” to have it say “Yes” then arrow to “Save and Exit” and press
“OK” to save the new setting.
Deactivate Secure Mode
1. Put an “Administrator” card in the card reader.
2. Arrow down to “Administration Menu” and press “OK” to select it.
3. Now arrow down to “Ventilation” and press “OK” to select it.
4. Next arrow down to “Secure Mode” and press “OK” to select it.
5. Now press “OK” to have it say “No” then arrow to “Save and Exit” and press
“OK” to save the new setting.

Labconco Protector Echo 180 Series Specifications

General

Brand	Labconco
Model	Protector Echo 180 Series
Category	Laboratory Equipment
Language	English