EasyManuals Logo
Home>Labconco>Laboratory Equipment>Protector Echo 180 Series

Labconco Protector Echo 180 Series User Manual

Labconco Protector Echo 180 Series
193 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #118 background imageLoading...
Page #118 background image
Chapter 7: Accessorizing the Protector Filtered Hood
Product Service 1-800-522-7658
113
Original instructions
Installing BACnet Gateway Hardware
The BACnet option (P/N 9581101), named ETH1000, provides BACnet
capability of the filtered hood, but it is up to the IT on-site to configure the BAS
Operating Workstation (BOW) according to its protocol with the data objects they
want to see. See Appendix F for details. Each BACnet can support up to ten
filtered hoods maximum.
ADA Remote Control
The ADA Remote Control (P/N 9579700) allows the wheelchair personnel and/or
shorter workers to access the fan and light switches through a wireless remote
control.
Additional User, Maintenance, and
Administrator Access Cards
The Protector Filtered Hood requires an Identification Card for use, service and
administration. Order the extra cards as listed below:
Part No.
Description
9580900
Administrator Card (majority of access)
9580901
User Card (limited access, must be programmed)
9580902
Maintenance Card (complete access)
Note: The User Card only allows limited access such as fan and light control.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Labconco Protector Echo 180 Series and is the answer not in the manual?

Labconco Protector Echo 180 Series Specifications

General IconGeneral
BrandLabconco
ModelProtector Echo 180 Series
CategoryLaboratory Equipment
LanguageEnglish

Related product manuals