MAINTENANCE
CLEANING AND CHECK UP
EXTERIOR
Regularly dust and clean the external cabinet areas as required, using a soft water-damp
cloth and mild soap. Check for blown bulbs and replace as required.
Any scratches or marks in the fiberglass or acrylic can be buffed out using car polish or
cut and polish.
INTERIOR
Regularly dust and vacuum the interior of the cabinet, taking care to remove any objects
that may have fallen on the PCBs. Check and tighten all fixing hardware and fasteners
as required.
Regularly check that all the Display and Button Lamps are operating through the
Sounds, Lamps and Display Test. Replace any globes that are not operational.
Always after cleaning the cabinet interior, check all harness connectors and restore
all loose or interrupted connections.