- 18 -
5.1 • TURNING THE OVEN ON
Press knob 16 for 3 seconds. If an error code
appears on displays 715, see chapter “Self-
diagnosis and errors guide”.
5.2 • SELECTING A PROGRAMME
Press the MENU button 13, turn knob 16 until
“New programme” is displayed and confirm by
pressing knob 16.
Turn knob 16, select one of the free
programmes and confirm by pressing knob 16.
5.3 • SELECT THE COOKING MODE
The Leds on cooking mode buttons flash:
press the desired cooking mode button (1 -
2 - 3). The cooking mode led will remain lit with
a fixed light.
5.4 • SETTING THE TEMPERATURE
The default temperature is shown on the
temperature display. Turn knob 7 to set the
temperature (right to increase, left to decrease),
which will be shown on display 6.
Confirm by pressing knob 7 or wait 10
seconds.
5.5A • SETTING THE TIME
The time display 10 shows [ PRE ]
Preheating, turn knob 11:
- to the right to set the cooking time;
- to the left to preheat the cooking chamber
[PrE].
Or
5.5B • SETTING THE CORE PROBE
See chapter "Setting the core probe".”.
Confirm by pressing knob 11 or wait 10
seconds.
5.6 • SETTING AUTOMATIC MOISTURE
CONTROL
See chapter “Automatic moisture control
system”.
Confirm by pressing knob 7 or wait 10
seconds.
5 • PROGRAM SETTINGS AND STORAGE
OPERATIONS
90037450rev00
To Next Page
Loading...
Need help?
General