Operation
549263_D_PUB_DATE_7_JUL_2014.DOC INSTALLATION, MAINTENANCE AND USER' MANUAL 13
Version Xcontrol Plus
After you have selected the required wash program, start the wash cycle by pressing the START button.
If you enter a number that does not correspond to any of the available programs, the display shows
the message INVALID. During the wash cycle the user can follow the progress of the wash sequence and the
remaining wash cycle time on the display.
End of wash cycle
The wash cycle time is counted down to zero on the display. After the completion of the wash cycle,
the door lock gets deactivated (it unlocks) and the display shows the message “UNLOAD”.
Open the door and remove the laundry from the machine. The message “UNLOAD” disappears
and the machine is ready to start a new program. The “SELECT CYCLE” option is displayed.
WARNING!
IF, AFTER A POWER CUT, THE MACHINE DOOR CANNOT BE OPENED AND THE MACHINE IS FITTED
WITH AN AUTOMATIC UNLOCKING CIRCUIT, WAIT UNTIL THE UNLOCKING CIRCUIT UNLOCKS
THE DOOR LOCK. BEFORE YOU OPEN THE DOOR, MAKE SURE THAT THE DRUM IS COMPLETELY
STILL AND THAT THE WATER HAS DRAINED FROM IT.
Power cut
Version Xcontrol
If a power cut occurs in an idle condition of the machine and no wash program is running, the machine
remains in the idle condition.
If a power cut occurs during the wash process and the door remains closed and locked, the wash program
will, after the power supply has been restored, automatically continue in the program beginning from
the step in which the program was interrupted.
Machines fitted with an automatic door-lock unlocking module:
See the chapter: “Automatic door-lock unlocking module”. If during the power cut the door lock gets unlocked
and the door remains closed, the message “PRESS START / OPEN DOOR” appears as soon as the power
supply is restored. If you open the door, the wash program will be cancelled. If you press the “START”
button, the wash program will continue beginning from the step in which the program was interrupted.
Wash program
number
Wash
program name
Remaining time wash
program
Units
Progression
bar
35 Min.
Prog 2: WARM WASH
!
To Next Page
Loading...
Need help?
General
