Operation
14 INSTALLATION, MAINTENANCE AND USER' MANUAL 549263_D_PUB_DATE_7_JUL_2014.DOC
Version Xcontrol Plus
If a power cut occurs in an idle condition of the machine and no wash program is running, the machine
remains in the idle condition.
If a power cut occurs during the wash process, the message “CONTINUE / STOP” appears as soon as
the power supply is restored. If you press the “STOP” button, the wash program will be cancelled. If you
press the “START” button, the wash program will continue beginning from the step in which the program
was interrupted.
Automatic door-lock unlocking module
Based on the order, the machine can be fitted with an automatic module for unlocking the door lock
in case of a power cut.
If it is a case of a short term power cut, this module does not effect the operation of the machine.
If it is a case of a long term power cut, the module unlocks the door lock. It is then possible to open the door
and remove the laundry.
WARNING!
BEFORE YOU OPEN THE DOOR, MAKE SURE THAT THE DRUM IS COMPLETELY STILL AND THAT
THE WATER HAS DRAINED FROM IT.
WARNING!
THE AUTOMATIC DOOR-LOCK UNLOCKING MODULE MUST NOT BE UTILIZED ON MACHINES THAT
ARE FITTED WITH A DRAIN PUMP OR REVERSE FUNCTION DRAIN VALVE.
How to open the door by failure
See chapter “Unblocking of the door lock in case of emergency”.
!
!
To Next Page
Loading...
Need help?
General
