Operation
12 INSTALLATION, MAINTENANCE AND USER' MANUAL 549263_D_PUB_DATE_7_JUL_2014.DOC
Start the washer
Version Xcontrol
Coin operated models
Choose the required wash program. Insert the correct amount of coins
in the slot - the sum must correspond to the selected program.
The display shows the remaining sum to be paid. After the payment
is done, the display prompts the user to start the program utilizing
the START button.
Push the START button to start the washer extractor. If you have
by mistake chosen a different wash program, you can change
the choice within the first 150 seconds utilizing the arrow buttons
“
up” and “ down”. When a more expensive washing
program was chosen, the value will be shown to add. When you
don‘t add more coins, the chosen program at the start will be executed.
During the washing cycle you can follow the actual washing sequence
and the remaining time on the displays.
Non-coin operated models
Choose the required program. Press the START button to start
the operation of the machine. If you have by mistake chosen
a different wash program, you can change the choice within the first
step utilizing the arrow buttons “
up” and “ down”.
During the washing cycle you can follow the actual washing
sequence and the remaining time on the displays.
If the machine operator has enabled the ADVANCE function, you can
move to the next step by pressing the START button.
To Next Page
Loading...
Need help?
General
