LECTRICEBIKES.COM | 602.715.0907 50
E004
E006
E007
E009
E011
E021
E030
E008
E010
Throttle Fault
Battery Undervoltage
Battery Overvoltage
Motor Fault
Speed Sensor
Reception Fault
Motor Temperature
Fault
Motor Temperature
Sensor Fault
Speed Sensor Fault
Communication Failure
Check throttle cable
Charge battery
Let battery cool down for 10
minutes and restart
Check controller connections
Check controller connections
Check the distance between
speed sensor and magnet
Check controller connections
Check controller connections
Turn bike off and let sit for
10 minutes
Error Code
Meaning Most Common Solution
Error Codes
The components of your Lectric eBike are continuously monitored
automatically. If a fault is detected, the corresponding error code will
appear on the display.
You should have your bicycle maintained at regular service intervals
at your local bicycle shop.
To prevent serious injury or death:
• NEVER open any of the components, including the battery,
display, motor, or PAS sensor. Service should only be performed
by a bicycle repair shop.
MAINTENANCE
WARNING!
To Next Page
Loading...
General