LECTRICEBIKES.COM | 602.715.0907 25
COCKPIT SYSTEM
Cockpit Instruments
Display Controls
Overview
When does the Pedal Assist activate?
Pedal Assist (PAS) functions only when you are pedaling in PAS level
1-5. If you do not pedal, the PAS will not activate. The motor output
always depends on your pedaling and the PAS level you have set.
PAS automatically switches off at the maximum speed set for
your Lectric eBike (up to 28 mph). When the speed falls below the
maximum set speed, PAS automatically becomes available again.
You can also use your Lectric eBike as a normal bicycle without
assistance at any time, either by switching the Cockpit System power
button OFF, or by setting PAS to 0. If the battery needs to be charged,
PAS will not function.
When the bicycle has not been used for 10 consecutive minutes, the
display will automatically shut down. The PAS and throttle features
will no longer work when the display is OFF.
DISPLAY
CONTROL
PAD
GEAR
SHIFTER
LCD DISPLAY
HALF-TWIST
THROTTLE
PLUS BUTTON
POWER
BUTTON
MINUS BUTTON
To Next Page
Loading...
General