BALTIC R410A-IOM-0708-E Page 105
Start/stop
Sdc.3
Sdc.12
Sdc.13
From the main screen, press the button
The Sdc.12 screen appears.
To stop the unit:
With button
or set the value to ‘Yes’ and confirm with button
The unit stops and the Sdc.13 screen appears
WARNING: Switching off the unit disables all the safety devices
Pressing the ‘Esc’ returns to the main screen.
If the unit is stopped, the Sdc.13 screen appears.
To start the unit, press button
The unit starts and the main screen appears.
1 Week Override
This function overrides the operating periods for a maximum of 7 days.
Sdc.14
From the Sdc.12 screen, press button twice to position the cursor over the
‘Override a period’ line
With button or set the period desired and confirm with button .
The Sdc.14 screen appears.
With button or set the days of the week to the period desired and confirm
with button
.
In this example, the unit will remain in the unoccupied period on Tuesday when
confirmed until midnight on Thursday.
To Next Page
Loading...
Need help?
General
