Page 3
OPTIONAL ACCESSORIES
B" Width Models C" Width Models D" Width Models
FILTER KITS
1
Air Filter and
Rack Kit
Horizontal (end) Size of filter − in.
(mm)
87L96 − 18 x 25 x 1
(457 x 635 x 25)
87L97 − 20 x 25 x 1
(508 x 635 x 25)
87L98 − 25 x 25 x 1
(635 x 635 x 25)
Side Return
Single 44J22 44J22 44J22
Ten Pack 66K63 66K63 66K63
Size of filter − in. (mm) 16 x 25 x 1
(406 x 635 x 25)
16 x 25 x 1
(406 x 635 x 25)
16 x 25 x 1
(406 x 635 x 25)
EZ Filter Base
Catalog No. − Ship. Wt. − lbs. (kg) 73P56 − 7 (3) 73P57 − 8 (4) 73P58 − 10 (5)
Size of field provided filter − in.
(mm)
16 x 25 x 1
(406 x 635 x 25)
20 x 25 x 1
(508 x 635 x 25)
24 x 24 x 1
(610 x 610 x 25)
CABINET ACCESSORIES
Down−Flow Additive Base 11M60 11M61 11M62
Horizontal Support Frame Kit 56J18 56J18 56J18
Return Air Base 76M88 74M74 74M75
CONDENSATE DRAIN KITS
Condensate Drain Heat Cable
6 ft. (1.8 m) 26K68 26K68 26K68
24 ft. (7.3 m) 26K69 26K69 26K69
50 ft. (15.2 m) 26K70 26K70 26K70
Heat Cable Tape
Fiberglass − 1/2 in. x 66 ft. 39G04 39G04 39G04
Aluminum foil − 2 in. x 60 ft. 39G03 39G03 39G03
Condensate Trap Alternate Location Kit − Up−Flow Only 76M20 76M20 76M20
CONTROLS
Twinning Kit 15L38 15L38 15L38
TERMINATION KITS − See Installation Instructions for specific venting information.
Termination Kits
Concentric
1−1/2 in. (38 mm) 71M80 − − − − − −
Direct Vent
A
lications
2 in. (51 mm) − − − 69M29 − − −
Only
3 in. (76 mm) − − − 60L46 60L46
Wall − Close
2 in. (51 mm) 22G44 − − − − − −
Couple
3 in. (76 mm) 44J40 44J40 44J40
Close Couple WTK − 2 in. (51 mm) 30G28 − − − − − −
3 in. (76 mm) 81J20 81J20 81J20
2
Termination
Roof 2 in. (51 mm) 15F75 15F75 15F75
or
Non−Direct Vent
Wall − Wall Ring Kit 2 in (51 mm) 15F74 15F74
3
15F74
Roof Termination Flashing Kit − Direct or Non−Direct
Vent − Contains two flashings.
44J41 44J41 44J41
1
Cleanable polyurethane frame type filter.
2
Kits contain enough parts for two, non−direct vent installations.
3
Non−direct vent only.
To Next Page
Loading...
Need help?
General