Lennox LNIV2610 User Manual

14 15
HOW TO USE THE BUTTONS HOW TO USE THE BUTTONS
SLEEP / FRESH function
• Pressing this button for less than 2 seconds will initiate the
SLEEP function. Keep pressing this button for more than 2
seconds and the FRESH function is initiated.
• The sleep function enables the unit to automatically increase
(cooling) or decrease (heating) by 1ºC per hour for the fi rst
two hours, then hold steady for the next 5 hours. After that
the unit will cease operation. It is able to maintain the most
comfortable temperature and save energy.
NOTE: The SLEEP function is only available under Cooling,
Heating and AUTO operations.
• When the FRESH function is initiated, the Ionizer/Plasma Dust
Collector (depending on models) is energized and will help to
remove pollen and impurities from the air.
Example of Timer Setting
TIMER ON OFF
On
Stop
2hourslater
after settin g
Set
Start
10 hours later
after setting
Off
Stop
Start
2hourslater
after setting
5hourslater
after setting
Set
TIMER ON OF F
COMBINED TIMER
(Setting both ON and OFF timers simultaneously)
TIMER OFF
TIMER ON
(On
Stop Start operation)
This feature is useful when you want to stop the air
conditioner after you go to bed, and start it again in the
morning when you wake up or when you return home.
Example:
To stop the air conditioner 2 hours after setting and start it
again 10 hours after setting.
1. Press the TIMER OFF button.
2. Press the TIMER OFF button again to display 2.0h on the
TIMER OFF display.
3. Press the TIMER ON button.
4. Press the TIMER ON button again to display 10h on the
TIMER ON display
5. Wait for 3 seconds and the digital display area will show
the temperature again. The “TIMER ON OFF” indicator
remains on and this function is activated.
TIMER ON TIMER OFF
(Off
Start Stop operation)
This feature is useful when you want to start the air
conditioner before you wake up and stop it after you leave
the house.
Example:
To start the air conditioner 2 hours after setting, and stop it 5
hours after setting.
1. Press the TIMER ON button.
2. Press the TIMER ON button again to display 2.0h on the
TIMER ON display.
3. Press the TIMER OFF button.
4. Press the TIMER OFF button again to display 5.0h on the
TIMER OFF display .
5. Wait for 3 seconds and the digital display area will show
the temperature again. The “TIMER ON OFF” indicator
remains on and this function is activated.
NOTE: The timer setting (TIMER ON or TIMER OFF) that in
sequence occurs directly after the set time will be activated
fi rst.
1
MO D E
SW I N G
TEM P
SHORTCUT
FA N
SPE E D
TIMER
OFF
RE SE T LO CK
LE D
FOLLOW ME
TIM E R
ON
T URBO
SEL F CLEA N
DI R E CT
SLEEP
FRE S H
1
2
MODE
SWING
TEMP
SHORTCUT
FAN
SPEED
TIMER
OFF
RESET LOCK
LED
FOLLO W M E
TIMER
ON
TURBO
SE LF C LE A N
DIRECT
SLEEP
FRESH
LED / FOLLOW ME function
• Pressing this button for less than 2 seconds will initiate LED
function. Keep pressing this button for more than 2 seconds
and the FOLLOW ME function is initiated.
• When the FOLLOW ME function is activated, the remote
display is actual temperature at its location. The remote
control will send this signal to the air conditioner every 3
minutes until the FOLLOW ME button is pressed again.
• The FOLLOW ME function is not available under DRY and FAN
mode.
• Switching the operation mode or turning off the unit will
cancel the FOLLOW ME function automatically.
TURBO / SELF-CLEAN function
• Pressing this button for less than 2 seconds will initiate
TURBO function. Pressing this button for more than 2
seconds, the SELF-CLEAN function is initiated.
• Turbo function enables the unit to reach the preset
temperature in the shortest possible time. When pressing
this button on cooling mode, the unit will blow strong cooling
air with super high fan speed. When pressing this button on
heating mode (applicable to the unit adopts PTC only), the
PTC will be energized and bring fast heating operation.
• Under SELF-CLEAN mode, the air conditioner will
automatically clean and dry the evaporator keeping it as
fresh for the next operation.
1
2
E963_Lennox AC Remote Controller 16pp A5_2.indd 14-15E963_Lennox AC Remote Controller 16pp A5_2.indd 14-15 21/12/11 10:07 AM21/12/11 10:07 AM

Lennox LNIV2610 Specifications

General

Brand	Lennox
Model	LNIV2610
Category	Air Conditioner
Language	English