XC21 - 2 to 5 Ton Air Conditioner / Page 6
FEATURES
Cabinet
Heavy-gauge steel construction
Pre-painted cabinet nish.
Painted base section.
Compressor and control box located in a separate
compartment, insulated with thick berglass insulation.
Compartment provides protection from the weather and
keeps sound transmission at a minimum.
Control box is conveniently located with all controls
factory wired.
Large removable panel provides service access.
Drainage holes are provided in base section for
moisture removal.
High density polyethylene unit support feet raise the
unit off of the mounting surface, away from damaging
moisture.
SmartHinge™ Louvered Coil Protection
Steel louvered panels
provides complete coil
protection.
Panels are hinged to
allow easy cleaning and
servicing of coils.
Panels may be
completely removed.
Interlocking tabs and
slots assure tight t on
cabinet.
Refrigerant Line
Connections, Electrical Inlets and Service Valves
Suction and liquid lines are located on corner of unit
cabinet and are made with sweat connections. See
dimension drawing.
Fully serviceable brass service valves prevent corrosion
and provide access to refrigerant system. Suction valve
can be fully shut off, while liquid valve may be front
seated to manage refrigerant charge while servicing
system.
Suction and liquid line service valves and gauge ports
are located inside the cabinet.
Refrigerant line connections and eld wiring inlets
are located in one central area of the cabinet. See
dimension drawing.
J
K
To Next Page
Loading...
Need help?
General
