Replacing CRUs
Replacing the wireless keyboard
Attention
Do not open your computer or attempt any repairs before reading the Important Product Information
Guide.
Note
The wireless keyboard is available only on some models.
1
Remove any media from the drives and turn off all connected devices and the computer. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected
to the computer.
2
Remove your failing wireless keyboard.
3
Take out the new wireless keyboard from the package.
4
Open the battery compartment cover, and install two AAA batteries according to the polarity
indicators.
5
Take away the USB dongle from the keyboard compartment or from the wireless mouse
compartment and connect it to an available USB connector on the computer.
6
Close the compartment cover. The keyboard is ready for use.
To Next Page
Loading...
Need help?
General