Replacing CRUs
Completing the parts replacement
Attention
Do not open your computer or attempt any repairs before reading the Important Product Information
Guide.
After completing the installation or replacement for all parts, reinstall the computer cover and reconnect the
cables.
To reinstall the computer cover and reconnect the cables to your computer, do the following:
1
Ensure that all components have been reassembled correctly and that no tools or loose
screws are left inside your computer.
2
Ensure that the cables are routed correctly before reinstalling the computer cover. Keep cables
clear of the hinges and sides of the computer chassis to avoid interference when reinstalling
the computer cover.
3
Install the computer cover.
To Next Page
Loading...
Need help?
General