Step 4. Tighten the screws to secure the keyboard.
Step 5. Connect the ac power adapter and all disconnected cables to the computer.
Base cover assembly
Follow the instructions to replace the base cover assembly.
Before you start, read
Generic Safety and Compliance Notices and print the following instructions.
Notes:
• Do not remove the base cover assembly when your computer is connected to ac power. Otherwise, there
might be a risk of short circuits.
For access, do the following:
1. Disable the built-in battery. See “Disable the built-in battery” on page 31.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn over the computer.
36
ThinkPad L14 Gen 5 and ThinkPad L16 Gen 1 Linux User Guide
To Next Page
Loading...
Need help?
General