If the computer does not start up after you reinstall the base cover assembly, disconnect the ac power
adapter and then reconnect it to the computer.
Memory module
Follow the instructions to replace the memory module.
Before you start, read
Generic Safety and Compliance Notices and print the following instructions.
Attention: Do not touch the contact edge of the memory module. Otherwise, the memory module might get
damaged.
For access, do the following:
1. Disable the built-in battery. See “Disable the built-in battery” on page 31.
38
ThinkPad L14 Gen 5 and ThinkPad L16 Gen 1 Linux User Guide
To Next Page
Loading...
Need help?
General